|
|
Chassis Electrical Systems
Maňák, Radim ; Janda, Marcel (referee) ; Hájek, Vítězslav (advisor)
Increasing demands onto active safety in service and passengers´s safety. This things requiring progression in technologies. In the first place electronic components were reached the greatest prosperity and improvement. Currently price electronic equipment is approximating to half price in be half car. The most important ones of safety is best quality and trouble-free operation. This project will be described splitting active safety and system integration to the unit system.
|
|
|
Design of the multipurpose small water reservoir
Rumanová, Jana ; Hyánková, Eva (referee) ; Doležal, Petr (advisor)
Master's thesis aims to design a small water reservoir. It is the dry water reservoir which is situated above a built-up area. The main function of this reservoir is a flood protection. Digital terrain model is created in a program BENTLEY MicroStation V8i – Power Civil. Focusing points in a data file are used in a process of creating of the DTM. Adjustments are done in AutoCAD. Particular hydro-technical calculations are calculated in a program Microsoft Excel. A program HEC-HMS is used for an assessment of a flood wave transformation and a program HEC-RAS is used for a water runoff simulation via emergency spillway.
|
|
|
fire station
Peňáz, Lubomír ; Mátl,, Miroslav (referee) ; Moudrý, Ivan (advisor)
The content of this thesis is the design layout and construction of the building of new fire station in South Moravian Region. It is an object split into two interconnected parts: administrative - two-storey, basementless garage for trucks - single-storey, basementless The object is used to perform the services of eight firefighters per shift and one full-time worker. Architecture was chosen so that the object is functionally meet the requirements of firefighters on duty at both organizational (work on PS) and at the operational (exit) procedure. The building is covered with a flat roof, attic walled building on the peripheral wall with white facade and symbols accentuating the purpose of the building. The inner workings of the object are designed to meet the performance demands of service 24ti - hour shifts. The building is brick, based on the footings and load distribution base. The roof structure is made of reinforced concrete load-bearing concrete slab with heat-waterproofing layers classical arrangement of layers. The building is insulated ETICS. This - the operational part is located on the 1st and 2nd floor of the south-western part of the building, single-storey garage built for trucks in the northeastern part.
|
|
| |
|
|
Fire station
Kaňa, Josef ; Kacálková, Lenka (referee) ; Kacálek, Petr (advisor)
The diploma thesis named Fire Station deals with project documentation at the level of construction execution documentation for a fire station. The building is located on the outskirts of Holešov in the part called Všetuly. The building is located in close proximity to the existing production plants, the local industrial zone, which is accessible from outside the city and close to the approach to the under-construction D49 and part of the city bypass. The project deals with the location of the building on the land, including paved areas and their connection to existing roads, the project also includes the location of sports fields for physical training. The building is designed as a two-story building with five parking spaces for emergency vehicles, where this space extends over both floors. On the 1st floor, the technical facilities of the station with storage and a dirty changing room are designed. On the 2nd floor, emergency rooms and offices of serving firefighters with hygienic facilities are designed. The station is designed according to the Fire Protection Act size P2 for a JPO I category unit with 24 serving firefighters in three shifts. As part of the proposal, vehicles at the existing unit were considered AZ – 30 M1Z Novus, CAS 3 – T815, CAS 20 – S2Z MB, KHA, TA – MAN, Škoda Kamiq.
|
|
|
Design of experimental device for measurement of tire cornering stiffness
Krůza, Libor ; Ramík, Pavel (referee) ; Porteš, Petr (advisor)
This thesis describes the design of devices that will measure the directional characteristics of the tires. The first step is to analyze the directional characteristics and methods of measurement. The following equipment design, which should be designed to function while it was cheapest. The device is designed as a trailer towing vehicle. It also includes analysis of individual plant components important to measure those variables.
|
|
|
Study of Possibility to Build Small Dams near Vyškov
Richter, Štěpán ; Žatecký, Stanislav (referee) ; Jandora, Jan (advisor)
This thesis deals with the design of small reservoirs at Vyškov na Moravě. Projected reservoirs’ dams are earth-fill and homogenous and each one is equipped with the bottom water outlet and the emergency spillway. The first reservoir, located on the tributary of the Drnůvka river, has the fountain type emergency spillway and the feed pipe bottom water outlet. The reservoir of the Merchanice river, situated at the Vyškov airport, is equipped with the lateral emergency spillway and the feed pipe bottom water outlet. The third design is the reconstruction of the Marchanka reservoir projecting the dam raise. For this small reservoir two variants of functional installations were elaborated.
|
|
|
The fire station in Zbýšov
Stuchlíková, Michaela ; Kalánek, Jiří (referee) ; Brzoň, Roman (advisor)
The thesis contains a fire station type P1 and object of gym in the administrative area Zbýšov u Oslavan. There is a fire station is build with three floors and the gym with two floors. The design of the fire station is followed accordingly with ČSN 73 5710, it contains premises for administration, day and nigh emergency, training tower and garage and gym. The building with build of ceramic blocks (Porotherm). The ceilings are prefabricated of the pre stressed ceiling slabs. The flats roof is single-skinned and the perimeter casing is made of ventilated facade.
|
|
|
Fluid couplings and torque convertors
Skokan, Jan ; Jandourek, Pavel (referee) ; Klas, Roman (advisor)
This bachelor thesis is devoted to the issue of fluid couplings and torque convertorsand their combination with mechanical gears. The main section outlines development and design of fluid couplings and torque convertors.Resources to improve their performance are also mentioned. Furthermore, there are mentioned combinations of fluid and mechanical transmission.
|
|
|
Design of Experimental Stand for the Study of Railway Vehicles Sanding
Galas, Radovan ; Hruška, Marek (referee) ; Šperka, Petr (advisor)
Presented master’s thesis describes the design and the implementation of an experimental device used for the study of tribological aspects of wheel-rail contact. In this work, the reader will first learn the fundamentals such as adhesion, slip, traction curve, etc. Subsequently, the work is describing devices that are used for the study of wheel-rail contact around the world. This section is followed by the author proposed solution. The result is a twin disc device in the scale of 1:3. The device allows determining traction characteristics for different environmental conditions (presence of water, sand and oil in contact for different temperatures) and various operating parameters (contact pressure and speed). A part of this work are also the validation experiments and complete design documentation.
|
guest ::
